Normal
Feeling is for those who wish to lower their vehicle,
while maintaining the comfort of the stock suspension.
NF210 lowers the vehicle an average of 1 1/4~1 1/2in
(30~40mm) without sacrificing the stock ride quality.
This is achieved by raising the spring rate no more
than 10%.
Tanabe
Sustec NF210 - Normal Feeling
Price: $259.95
Geared
for performance, trace your favorite racing line
with the performance-oriented GF210 series springs.
Featuring increased spring rates of 20-30% over stock,
Grip Feeling is more oriented towards performance.
Lowering the ride height 1 1/24 to 1 1/2in (30-40mm)
gives the car an aggressive stance, while providing
a lower center of gravity for an increased amount
of turning stability.
Tanabe
Sustec GF210 - Grip Feeling
Price: $259.95
Corner
flatter and faster with our specially designed larger
diameter sway bars. Engineered for precise fitment. Experience
increased roll resistance and cornering stability without
the compromise of ride comfort. Fine-tuning of the suspension
made easy without the need to change spring rates. Take
your performance to the next level through the corners.
Tanabe
Sustec Front Sway Bar
Price: $230.00
Corner
flatter and faster with our specially designed larger
diameter sway bars. Engineered for precise fitment. Experience
increased roll resistance and cornering stability without
the compromise of ride comfort. Fine-tuning of the suspension
made easy without the need to change spring rates. Take
your performance to the next level through the corners.
Tanabe
Sustec Rear Sway Bar
Price: $230.00
Racing
Beat-designed sway bars reduce chassis roll during
cornering and increases your car’s sensitivity
to steering inputs, thereby improving maximum cornering
power. Substantial engineering effort, select steel
alloys, and precise heat-treating processes are combined
to produce top performance components. All Racing
Beat sway bars are finished with a distinctive, red
powder coating that provides a smooth, glossy protective
layer. You can be assured of many years of superior
handling performance with these proven bars!
The diameter of the front tubular bar is 1.25" (32mm)
x .1875" wall thickness, as compared to the stock
1.05" (27mm) x .134" wall thickness front bar.
An additional feature of the front bar is a pair of OEM
style “stoppers” to prevent the bar from
sliding sideways in the bar bushings during heavy cornering
effort. Each bar is supplied with replacement urethane
bushings, bar clamps, Prothane grease and installation
instructions.
The diameter of the rear tubular bar is .75" (19mm)
x .125" wall thickness, as compared to the stock
.632" (16mm) x .097" wall thickness rear bar.
An additional feature of the front bar is a pair of OEM
style “stoppers’ to prevent the bar from
sliding sideways in the bar bushings during heavy cornering
effort. Each bar is supplied with replacement urethane
bushings, Prothane grease and installation instructions.
(The original OEM bar clamps are retained for use with
this bar.)
Suspension
Specialties Sway Bar Set
Price: $334.00
