The stock flywheel was designed with extra weight to make stop and go driving a little easier. The disadvantage of this added weight is that your engine has to use more power to accelerate the flywheel which causes slower revs and an elastic feeling when engaging the clutch. If you’re building your car for higher performance, a performance lightweight flywheel will allow the engine to accelerate quicker with more power getting transferred to the asphalt. For comparison purposes, the stock flywheel weighs around 20lbs, the Chromoly StreetLite flywheel weighs 13.8lbs and the Bönez Ultra light units weighs 9.6lbs.

 

All ACT flywheels are made from forged Chrome-Moly Steel which is stronger than cast iron, billet steel or aluminum, CNC Machined to exact tolerances. Featuring induction hardened integral ring gear, durable and thick enough to be resurfaced. The StreetLight weighs only 13.8lbs for enhanced engine response. Certified SFI Specification 1.1 - Legal for racing.
Note: Includes necessary installation hardware but requires counterweight (sold separately, see below).

ACT StreetLite Flywheel - 13.8lbs (SFI Certified)
Price: $279.95

 

 

All Like the ACT flywheel, the Bönez flywheels are made from forged Chrome-Moly Steel and CNC Machined to exact tolerances. Featuring induction hardened integral ring gear and are thick enough to be resurfaced. The Bönez Light flywheel weighs 13.8lbs for enhanced engine response.
Note: Includes necessary installation hardware but requires counterweight (sold separately, see below).

Bönez Light Flywheel - 13.8lbs
Price: $249.95

 

 

All ACT flywheels are made from forged Chrome-Moly Steel which is stronger than cast iron, billet steel or aluminum, CNC Machined to exact tolerances. Featuring induction hardened integral ring gear, durable and thick enough to be resurfaced. Certified SFI Specification 1.1 - Legal for racing. The ProLite Flywheel is lighter than the StreetLite and weighs 9.8lbs, offering quicker engine response with a slight compromise in drivability.
Note: Includes necessary installation hardware but requires counterweight (sold separately, see below).

ACT ProLite Flywheel - 9.8lbs (SFI Certified)
Price: $314.95

 

 

All Like the ACT flywheel, the Bönez flywheels are made from forged Chrome-Moly Steel and CNC Machined to exact tolerances. Featuring induction hardened integral ring gear, durable and thick enough to be resurfaced. The Bönez SuperLight Flywheel is the lightest flywheel available for steet driven cars. It weighs only 9.6lbs and is intended for cars that are primarily used for track days and autocross. It can be driven on the street with a slight compromise in low RPM drivability.
Note: Includes necessary installation hardware but requires counterweight (sold separately, see below).

Bönez SuperLight Flywheel - 9.6lbs
Price: $299.95

 

 

This rear counterweight is required when upgrading to a performance flywheel. It's compatible with all the performance flywheels that we offer.

93-95 Rx7 rear counterweight
Price: $139.95

 

 

*Prices subject to change without notice